|
VTC-700C high‑speed drilling tapping center / FANUC 0i‑MF Plus
| Place of Origin | China |
| Brand Name | GUSS |
| Certification | CE |
500mm X axis CNC vertical mill
,24 tool magazine vertical machining center
,complex milling vertical CNC machine
VTC-700C high‑speed drilling tapping center with FANUC 0i‑MF Plus, 20000rpm BT30 direct‑drive spindle, 48m/min rapid traverse, 21‑tool magazine, for 3C, aluminum housing mass‑production milling & tapping.
Technical Specification
| project | unit | VTC-700C |
|---|---|---|
| X/Y/Z axis travel | mm | 700 / 400 / 330 |
| Distance from spindle nose to worktable surface | mm | 130-460 |
| Distance from spindle center to column guide surface | mm | 462 |
| spindle nose taper | BT30 | |
| rivets | 45 ° | |
| Spindle motor power (rated/overload) | kw | 3.7-5.5 |
| Spindle motor torque (rated/overload) | Nm | 11.8-28.7 |
| maximum spindle speed | rpm | 20000 |
| Tool magazine type | Clamp arm type | |
| Number of cutting tools | pcs | twenty one |
| Maximum tool diameter / adjacent toolless | m m | 100/140 |
| Maximum tool length | mm | 250 |
| Maximum tool weight | Kg | 3 |
| Tool change time (adjacent/far) | sec | 0.35/1.3 |
| X/Y/Z axis motor rated power | K w | 2.5/2.5 / 2.7 |
| X/Y/Z axis motor rated torque | Nm | 8.0/8.0/12.0 |
| workbench area | mm | 800 * 420 |
| T-slot | mm | 3-14 * 125 |
| Maximum load of the workbench | K g | 300 |
| X-axis rapid displacement | m/min | 48 |
| Y-axis rapid displacement | m/min | 48 |
| Z-axis rapid displacement | m/min | 48 |
| Cutting feed rate | mm/min | 1 - 10000 |
| Positioning accuracy | mm | 0.005/0.005/0.005 |
| Repeatability | mm | 0.003/0.003/0.003 |
| controller | FANUC | Oi MF Plus |
| Machine weight | K g | 4000 |
| Power requirements | KVA | 20 |
| Water tank capacity | L | 200 |
| air compressor source | kg/cm 2 | 6.0 |
| Mechanical height | mm | 2200 |
| Area | mm | 1900 * 2320 |
Standard Equipment List
1.Japanese FANUC 0i MF Plus controller (10.4")
2.Five-axis four-linkage function enabled
3.High-speed, high-precision AICC1
4.Automatic tool magazine reset
5.Processing mode selection
6.System energy saving mode
7.Customize the screen
8.Full-face shield
9.Post-flushing debris removal
10.Automatic lubrication system
11.Anchor bolts and washers
12.Toolbox
13.Warning lights and illumination lights
14.Handheld air gun/ water gun
15.Iron scrap pan and water tank
16.Transformer
17.Mechanical, electrical, and operating instructions
18.Rigid tapping
19.BT30 direct-drive spindle 20000rpm
20.BT30-21T Clamp Arm Tool Magazine
21.Spindle air curtain dust prevention system (customer needs to provide a dry and clean air source)
22.Spindle oil cooler
Contact Us at Any Time
