|
MH-800 Horizontal Machining Centers Inverted T Classic Structure High Speed Machining Center
| Miejsce pochodzenia | Chiny |
| Nazwa handlowa | Guss |
| Numer modelu | MH-800 |
- Inverted T Classic Structure
- Heavy-Duty, Large Cutting Capacity
- Superior Rigidity and Stability
- Excellent Precision and Extraordinary Efficiency
| Item | Unit | MH-800 | |
|---|---|---|---|
| System | CNC System | - | FANUC |
| Rapid Traverse Speed | mm/min | 24000/24000/24000 | |
| Cutting Feed Rate | mm/min | 1-10000 | |
| 3-Axis Drive Power | Kw | 3.0/3.0/3.0[Note①] | |
| 3-Axis Drive Torque | N.m | 36.0/36.0/36.0[Note①] | |
| Worktable | T-Slot Size/Threaded Hole Specification | - | 5-18-100/M16*24 Thread |
| Worktable Size | mm | 800*800 | |
| Worktable Indexing | ° | 1[Note②] | |
| Worktable Speed | r/min | 8.3 | |
| Max Worktable Rotation Diameter | mm | 1600 | |
| Max Worktable Load | Kg | 1500 | |
| Stroke | 3-Axis Travel | mm | 1400*1100*1100 |
| Distance from Spindle Center to Worktable Surface | mm | 130-1230 | |
| Distance from Spindle Nose to Worktable Center | mm | 200-1300 | |
| Spindle | Spindle Power | Kw | 15-18.5 |
| Max Spindle Speed | rpm | 6000 | |
| Spindle Taper Hole | - | BT50 | |
| Transmission | Screw Diameter/Pitch | mm | Φ50D12/Φ50D12/Φ50D12 |
| Linear Rail Brand/Type/Width | - | PMI Roller 55mm/55mm/55mm[Note③] | |
| Guide Rail Qty/Slider Qty | Pcs | 2-4/2-4/2-6 | |
| Tool Magazine | Tool Capacity | Pcs | 24 |
| BT/BT8T Tightening Angle | ° | 45° | |
| Max Tool Diameter | mm | Φ110 (Full)/Φ210 (Empty Adjacent Tool) | |
| Max Tool Length/Weight | mm/Kg | 350/15 | |
| Tool Change Time | s | 2.2 | |
| Partial Configuration | Automatic Chip Removal | - | Screw Conveyor + Chain Conveyor |
| Automatic Lubrication System | - | Thin Oil Lubrication | |
| Cabinet Cooling | - | Heat Exchanger | |
| Accuracy | Positioning Accuracy (Full Stroke) | mm | 0.012/0.012/0.012/12sec |
| Repeat Positioning Accuracy (Full Stroke) | mm | 0.008/0.008/0.008/6sec | |
| Others | Air Flow/Pressure | - | Flow 150(L/min)/Pressure(6bar) |
| Total Power | Kw | 35 | |
| Machine Weight | Kg | 15000 | |
| Machine Overall Size (L*W*H) | mm | 3800*4600*3600 | |
Robot tool magazine,chain-type chip conveyor,spindle oil cooler,internal tool cooling,water gun,air gun,spindle air curtain,spindle ring spray,centralized lubrication,air source treatment,oil-water separation,heat exchanger
Mitsubishi/New Generation system,hollow screw,grease lubrication,electric cabinet air conditioner,fourth axis,fifth axis,column heightening,tooling,fixture
※ The product appearance and configuration will be improved with technological development, but not lower than the current technical requirements. We will not notify you separately. Please refer to the technical agreement at the time of purchase for details.
Note ①: Three-axis power and rotation accuracy are based on FANUC. For detailed data of Mitsubishi and New Generation systems, please consult the corresponding sales manager.
Note ②: Optional 0.001° indexing table.
Note ③: If out of stock, substitutes of the same specification such as HIWIN, Rexroth, and THK will be used, and we will not notify you separately.
SKONTAKTUJ SIĘ Z NAMI W DOWOLNEJ CHWILI
