|
VMC-1375HL Vertical Machining Centers 3 Axis 1-10000mm/Min Cutting Feed Speed
| Place of Origin | China |
| Brand Name | Guss |
| Model Number | VMC-1375HL |
10000mm/Min vertical machining centers
,3 Axis vertical machining centers
,3 Axis vmc cnc
Product Features
- Integrated Optimization: Structural Strengthening of Moving Components
- Y-axis Lightening: Low-Center-of-Gravity Base Design
- Component Optimization: Higher Load-Bearing Capacity
- Cost Optimization Control: Achieve Extreme Cost-Effectiveness
Technical Specifications
| Item | Unit | VMC-1375HL | |
|---|---|---|---|
| System | CNC System | - | FANUC |
| Rapid Speed | mm/min | 24000/24000/24000 | |
| Cutting Feed Speed | mm/min | 1-10000 | |
| 3-Axis Rated Power | Kw | 3.0/3.0/3.0 [Note①] | |
| 3-Axis Rated Torque | N.m | 20.0/20.0/27.0 [Note①] | |
| Worktable | T-Slot Dimensions | - | 7-18-100 |
| Worktable Dimensions | mm | 1400×700 | |
| Max Worktable Load | Kg | 1000 | |
| Travel | 3-Axis Travel | mm | 1300×750×600 [Note②] |
| Distance from Spindle Nose to Worktable | mm | 150-750 | |
| Spindle | Spindle Power | Kw | 11-15 |
| Max Spindle Speed | rpm | 10000(Belt)/12000(Direct Drive)/15000(Direct Drive) | |
| Spindle Taper | - | BT40 [Note③] | |
| Transmission | Screw Diameter/Pitch | mm | Φ40D12/Φ40D12/Φ40D12 |
| Linear Rail Brand/Type/Width | - | PMI Roller 45mm/Roller 55mm/Roller 45mm [Note④] | |
| Number of Rails/Sliders | Pcs | 2-6/2-4/2-6 | |
| Tool Magazine | Tool Magazine Capacity | Pcs | 24 [Note⑤] |
| BT/BBT Pull Stud Angle | ° | 45° | |
| Max Tool Diameter | mm | Φ80(Full Magazine)/Φ150(Empty Adjacent Tool) | |
| Max Tool Length/Weight | mm/kg | 300/8 | |
| Tool Change Time | s | 1.3 | |
| Partial Configuration | Automatic Chip Removal | - | Rear Flushing |
| Automatic Lubrication System | - | Thin Oil Lubrication | |
| Electrical Cabinet Cooling | - | Heat Exchanger | |
| Accuracy | Positioning Accuracy (Full Travel) | mm | 0.008 |
| Repeat Positioning Accuracy (Full Travel) | mm | 0.006 | |
| Others | Air Supply Flow/Pressure | - | Flow 150(L/min)/Pressure(6Bar) |
| Total Power | Kw | 30 | |
| Machine Weight | Kg | 7800 | |
| Machine Overall Dimensions (L×W×H) | mm | 3300×2900×2900 [Note⑥] | |
Standard Configuration:
Mechanical manual tool magazine,rear-flush chip removal,spindle oil cooler,water gun,air gun,spindle air curtain,spindle ring spray,centralized lubrication,air source treatment,oil-water separation,heat exchanger,nitrogen balance
Optional Configuration:
Mitsubishi/Syntec system,hollow screw,chain-type chip removal,grease lubrication,electrical cabinet air conditioner,4-axis,5-axis,column heightening,tool internal cooling,fixtures,clamps
※ The product’s appearance and configuration will be updated with technological development (but will not be lower than current technical requirements). No separate notification will be given; specific details shall be subject to the technical agreement at the time of purchase.
Note ①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.
Note ②: This model is designed for export (considering container height), so the standard Z-axis travel is 600mm; domestic customers can opt for the model with 700mm Z-axis travel.
Note ③: Optional BT50-155 spindle.
Note ④: In case of stock shortage, equivalent specifications (e.g., HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given.
Note ⑤: Optional 30-tool capacity for the tool magazine.
Note ④:This dimension does not include the water tank (the width of the rear-flush water tank increases by 550mm) or the chain (the length of the chain increases by 1000mm). Select one option based on the actual configuration.
Contact Us at Any Time
