Maison
>
produits
>
centre de perçage et de taraudage
>
TAP-1100 device offering monitoring and control solutions to optimize manufacturing processes and support automation systems
|
TAP-1100 device offering monitoring and control solutions to optimize manufacturing processes and support automation systems
| Lieu d'origine | Chine |
| Nom de marque | Guss |
| Certification | CE |
| Numéro de modèle | Le TAP-1100 |
Détails du produit
Système CNC:
Fanuc
Nom du produit:
Le TAP-1100
Température de fonctionnement:
0°C à 40°C
Options de montage:
Plafond et mur
Gestion:
Gestion basée sur le cloud et locale
Vitesse rapide:
48 000/48 000/48 000 mm/min
Taille de la table de travail:
800×420mm
Type d'antenne:
Antennes internes
Conditions de paiement et d'expédition
Quantité de commande min
1
Prix
Négociable
Détails d'emballage
Différentes méthodes d'emballage sont adoptées selon les différents modes de transport.
Conditions de paiement
Western Union, Moneygram, T / T
Description de produit
TAP1100 Intelligent Control Device
Providing comprehensive monitoring and control capabilities for manufacturing processes
Product Features
- High-speed spindle movement for highly effective processing
- Servo fast tool change system
- Silent guide rail with low friction and high sensitivity
- Large span herringbone columns resist high acceleration and deceleration impact
- Maximum tapping speed of 5000rpm for greatly improved efficiency
Technical Specifications
| Item | Unit | TAP-1100 |
|---|---|---|
| System | CNC System | FANUC |
| Rapid Speed | mm/min | 36000/48000/48000 |
| Cutting Feed Rate | mm/min | 1-10000 |
| 3-Axis Rated Power | Kw | 2.7/2.7/2.7 [Note①] |
| 3-Axis Rated Torque | N.m | 12.0/12.0/12.0 [Note①] |
| Worktable | T-Slot Size | 3-14-125 |
| Worktable Size | mm | 1200*400 |
| Max Worktable Load | Kg | 400 |
| Stroke | 3-Axis Stroke | mm |
| Spindle Nose to Worktable Distance | mm | 120-420 |
| Spindle | Spindle Power | Kw |
| Max Spindle Speed | rpm | 20000 |
| Spindle Taper | - | BT30 |
| Transmission | Screw Diameter/Pitch | mm |
| Linear Rail Brand/Type/Width | - | PMI Ball 45mm/PMI Ball 30mm/PMI Roller 35mm [Note②] |
| Guideway Quantity/Slider Quantity | Pcs | 2-6/4-8/2-4 |
| Tool Magazine | Tool Capacity (Pocket) | Pcs |
| BT1/BBT Pull Stud Angle | ° | 45° |
| Max Tool Diameter | mm | Φ60(Full Magazine)/Φ80(Empty Adjacent Tool) |
| Max Tool Length/Weight | mm/kg | 200/2 |
| Tool Change Time (Adjacent/Distant) | s | 0.35/1.3 |
| Partial Configuration | Automatic Chip Removal | - |
| Automatic Lubrication System | - | Thin Oil Lubrication |
| Electrical Cabinet Cooling | - | Heat Exchanger |
| Accuracy | Positioning Accuracy (Full Stroke) | mm |
| Repeat Positioning Accuracy (Full Stroke) | mm | 0.005 |
| Others | Air Flow/Pressure | - |
| Total Power | Kw | 25 |
| Machine Weight | Kg | 4500 |
| Machine Overall Dimensions (L*W*H) | mm | 3200*2100*2200/3200*2320*2200 (with water tank) |
Standard Configuration
- Umbrella-shaped servo tool magazine
- Rear-flush chip removal
- Spindle oil cooler
- Water gun
- Air gun
- Spindle air curtain
- Spindle ring spray
- Centralized lubrication
- Air source treatment
- Oil-water separation
- Heat exchanger
Optional Configuration
- Mitsubishi/Syntec system
- Direct-drive 24000rpm spindle
- Hollow screw
- Grease lubrication
- Electrical cabinet air conditioner
- 4-axis, 5-axis
- Column heightening
- Tool internal cooling
- Fixtures, clamps
※ The product appearance and configuration are subject to improvement with technological development, but will not be lower than current technical requirements. No separate notification will be given; the specific details shall be based on the technical agreement at the time of purchase.
Note ①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.
Note ②: In case of stock shortage, equivalent specifications (such as HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given.
Étiquettes:
centre de perçage et de taraudage,
centre de forage
Produits recommandés
Contactez-nous à tout moment
+8615365958399
N° 8, avenue Konggang, ville de Guozhuang, ville de Jurong, ville de Zhenjiang
