Casa
>
prodotti
>
centro di foratura e maschiatura
>
TAP-1100 device offering monitoring and control solutions to optimize manufacturing processes and support automation systems
|
TAP-1100 device offering monitoring and control solutions to optimize manufacturing processes and support automation systems
| Luogo di origine | Cina |
| Marca | Guss |
| Certificazione | CE |
| Numero di modello | TAP-1100 |
Dettagli del prodotto
Sistema CNC:
Fanuc
Nome prodotto:
TAP-1100
Temperatura operativa:
Da 0°C a 40°C
Opzioni di montaggio:
Montaggio a soffitto e a parete
Gestione:
Gestione locale e basata su cloud
Velocità rapida:
48000/48000/48000 mm/min
Dimensioni del piano di lavoro:
800×420mm
Tipo di antenna:
Antenne interne
Termini di pagamento e di spedizione
Quantità di ordine minimo
1
Prezzo
Negoziabile
Imballaggi particolari
I metodi di imballaggio sono diversi a seconda dei diversi modi di trasporto.
Termini di pagamento
Western Union, MoneyGram, T/T.
Descrizione di prodotto
TAP1100 Intelligent Control Device
Providing comprehensive monitoring and control capabilities for manufacturing processes
Product Features
- High-speed spindle movement for highly effective processing
- Servo fast tool change system
- Silent guide rail with low friction and high sensitivity
- Large span herringbone columns resist high acceleration and deceleration impact
- Maximum tapping speed of 5000rpm for greatly improved efficiency
Technical Specifications
| Item | Unit | TAP-1100 |
|---|---|---|
| System | CNC System | FANUC |
| Rapid Speed | mm/min | 36000/48000/48000 |
| Cutting Feed Rate | mm/min | 1-10000 |
| 3-Axis Rated Power | Kw | 2.7/2.7/2.7 [Note①] |
| 3-Axis Rated Torque | N.m | 12.0/12.0/12.0 [Note①] |
| Worktable | T-Slot Size | 3-14-125 |
| Worktable Size | mm | 1200*400 |
| Max Worktable Load | Kg | 400 |
| Stroke | 3-Axis Stroke | mm |
| Spindle Nose to Worktable Distance | mm | 120-420 |
| Spindle | Spindle Power | Kw |
| Max Spindle Speed | rpm | 20000 |
| Spindle Taper | - | BT30 |
| Transmission | Screw Diameter/Pitch | mm |
| Linear Rail Brand/Type/Width | - | PMI Ball 45mm/PMI Ball 30mm/PMI Roller 35mm [Note②] |
| Guideway Quantity/Slider Quantity | Pcs | 2-6/4-8/2-4 |
| Tool Magazine | Tool Capacity (Pocket) | Pcs |
| BT1/BBT Pull Stud Angle | ° | 45° |
| Max Tool Diameter | mm | Φ60(Full Magazine)/Φ80(Empty Adjacent Tool) |
| Max Tool Length/Weight | mm/kg | 200/2 |
| Tool Change Time (Adjacent/Distant) | s | 0.35/1.3 |
| Partial Configuration | Automatic Chip Removal | - |
| Automatic Lubrication System | - | Thin Oil Lubrication |
| Electrical Cabinet Cooling | - | Heat Exchanger |
| Accuracy | Positioning Accuracy (Full Stroke) | mm |
| Repeat Positioning Accuracy (Full Stroke) | mm | 0.005 |
| Others | Air Flow/Pressure | - |
| Total Power | Kw | 25 |
| Machine Weight | Kg | 4500 |
| Machine Overall Dimensions (L*W*H) | mm | 3200*2100*2200/3200*2320*2200 (with water tank) |
Standard Configuration
- Umbrella-shaped servo tool magazine
- Rear-flush chip removal
- Spindle oil cooler
- Water gun
- Air gun
- Spindle air curtain
- Spindle ring spray
- Centralized lubrication
- Air source treatment
- Oil-water separation
- Heat exchanger
Optional Configuration
- Mitsubishi/Syntec system
- Direct-drive 24000rpm spindle
- Hollow screw
- Grease lubrication
- Electrical cabinet air conditioner
- 4-axis, 5-axis
- Column heightening
- Tool internal cooling
- Fixtures, clamps
※ The product appearance and configuration are subject to improvement with technological development, but will not be lower than current technical requirements. No separate notification will be given; the specific details shall be based on the technical agreement at the time of purchase.
Note ①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.
Note ②: In case of stock shortage, equivalent specifications (such as HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given.
Prodotti raccomandati
Contattaci in qualsiasi momento
+8615365958399
n. 8, via Konggang, città di Guozhuang, città di Jurong, città di Zhenjiang
