বাড়ি
>
পণ্য
>
তুরপুন এবং লঘুপাত কেন্দ্র
>
TAP-740 CNC Drilling and Tapping Center (BT30 | 20,000 RPM) High Quality
|
TAP-740 CNC Drilling and Tapping Center (BT30 | 20,000 RPM) High Quality
| উৎপত্তি স্থল | চীন |
| পরিচিতিমুলক নাম | Guss |
| সাক্ষ্যদান | CE |
| মডেল নম্বার | TAP-740 |
পণ্যের বিবরণ
সিএনসি সিস্টেম:
ফানুক
পেমেন্ট ও শিপিংয়ের শর্তাবলী
ন্যূনতম চাহিদার পরিমাণ
1
মূল্য
আলোচনা সাপেক্ষ
প্যাকেজিং বিবরণ
পরিবহনের বিভিন্ন মোড অনুযায়ী বিভিন্ন প্যাকেজিং পদ্ধতি গ্রহণ করা হয়।
পরিশোধের শর্ত
ওয়েস্টার্ন ইউনিয়ন, মানিগ্রাম, টি/টি
পণ্যের বর্ণনা
TAP-740 CNC Drilling and Tapping Center (BT30 | 20,000 RPM)
The TAP-740 is a high-performance CNC Drilling and Tapping Center engineered for the precision requirements of the 3C, automotive, and aerospace industries. Featuring an ultra-high-speed 20,000 rpm direct-drive spindle and a rapid traverse rate of 48 m/min across all axes, this machine delivers exceptional performance for high-volume, high-precision small part manufacturing.
Core Technical Advantages
Superior Structural Stability & Precision
- One-Piece Mehanite Casting: The bed, column, and spindle box are made of high-precision castings, processed via five-sided machining centers in a single setup for permanent quality.
- Stress-Relieved Performance: All castings undergo thorough annealing to eliminate internal stress, ensuring zero deformation over years of operation.
- Triangular Box Structure: The column features a wide-base, symmetrical triangular box design for maximum load-bearing stability and vibration damping.
Extreme Speed & Efficiency
- 20,000 RPM Direct-Drive Spindle: Standard BT30 high-speed spindle reduces vibration and heat, delivering superior surface finishes.
- Rapid Tool Change: Equipped with a 21-tool clamp-arm magazine, achieving a lightning-fast tool-to-tool time of just 0.35 seconds.
- No Home Return Required: FANUC absolute servo motors eliminate the need for origin return, drastically reducing non-cutting time.
World-Class Component Configuration
We partner with industry leaders to ensure global reliability and easy maintenance:
- CNC System: Japan FANUC 0i MF Plus (10.4" Screen)
- Motion Control: PMI/HIWIN linear guides and ball screws (30mm) for low friction and high circularity accuracy
- Bearings: High-precision NSK (Japan) or FAG (Germany) bearings
Technical Specifications
| Item | Unit | TAP-740 |
|---|---|---|
| System | CNC System | FANUC |
| Rapid Speed | mm/min | 48000/48000/48000 |
| Cutting Feed Rate | mm/min | 1-10000 |
| 3-Axis Rated Power | Kw | 2.5/2.7/2.7 [Note①] |
| 3-Axis Rated Torque | N.m | 8.0/12.0/12.0 [Note①] |
| Worktable | T-Slot Size | 3-14-125 |
| Worktable Size | mm | 800*420 |
| Max Worktable Load | Kg | 300 |
| Stroke | 3-Axis Stroke | 700*400*350 |
| Spindle Nose to Worktable Distance | mm | 130-460 |
| Spindle | Spindle Power | 3.7-5.5 |
| Max Spindle Speed | rpm | 20000 |
| Spindle Taper | - | BT30 |
| Transmission | Screw Diameter/Pitch | Φ28D16/Φ28D16/Φ32D16 |
| Linear Rail Brand/Type/Width | - | PMI Ball 30mm/PMI Ball 30mm/PMI Roller 30mm [Note②] |
| Guideway Quantity/Slider Quantity | Pcs | 2-4/2-4/2-4 |
| Tool Magazine | Tool Capacity (Pocket) | 21 |
| BT1/BBT Pull Stud Angle | ° | 45° |
| Max Tool Diameter | mm | Φ60(Full Magazine)/Φ80(Empty Adjacent Tool) |
| Max Tool Length/Weight | mm/kg | 200/2 |
| Tool Change Time (Adjacent/Distant) | s | 0.35/1.3 |
| Partial Configuration | Automatic Chip Removal | Rear Flush |
| Automatic Lubrication System | - | Thin Oil Lubrication |
| Electrical Cabinet Cooling | - | Heat Exchanger |
| Accuracy | Positioning Accuracy (Full Stroke) | 0.008 |
| Repeat Positioning Accuracy (Full Stroke) | mm | 0.005 |
| Others | Air Flow/Pressure | Flow 150L/(min)/Pressure(6Bar) |
| Total Power | Kw | 20 |
| Machine Weight | Kg | 4000 |
| Machine Overall Dimensions (L*W*H) | mm | 1900*2100*2200/1900*2320*2200 (with water tank) |
Standard Configuration
- Umbrella-shaped servo tool magazine
- Rear-flush chip removal
- Spindle oil cooler
- Water gun
- Air gun
- Spindle air curtain
- Spindle ring spray
- Centralized lubrication
- Air source treatment
- Oil-water separation
- Heat exchanger
Optional Configuration
- Mitsubishi/Syntec system
- Direct-drive 24000rpm spindle
- Hollow screw
- Grease lubrication
- Electrical cabinet air conditioner
- 4-axis, 5-axis
- Column heightening
- Tool internal cooling
- Fixtures, clamps
※ The product appearance and configuration are subject to improvement with technological development, but will not be lower than current technical requirements. No separate notification will be given; the specific details shall be based on the technical agreement at the time of purchase.
Note ①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.
Note ②: In case of stock shortage, equivalent specifications (such as HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given.
প্রস্তাবিত পণ্য
যে কোনো সময় আমাদের সাথে যোগাযোগ করুন
+8615365958399
নং ৮, কোংগাং এভিনিউ, গুওজুয়াং টাউন, জুরং সিটি, ঝেনজিয়াং সিটি
